Hello, welcome to the official website of Shenzhen Deemno Technology Co., Ltd.
Product center
Products
Electronic accessories solution
Products
Current position: Home Products Structural queue AB fast dry structure
Thermal queue
Irry queue
Three-proof
Bonding queue
Quick-dry queue
Structural queue
Pad queue
Custom queue
  • AB fast dry structure
  • AB fast dry structure
  • AB fast dry structure
AB fast dry structure
Name:AB fast dry structure
Model:DML6211

This product is an AB two-component epoxy resin structural adhesive, which can be quickly cured to improve work efficiency. It has excellent bonding properties to metals, ceramics, glass, and plastics. It can be cured at room temperature, or it can be cured by heating, which is an excellent structural adhesive glue.

×
Provide relevant information and send samples for free!
×
Custom service

(1) Product Overview

This product is a two-component epoxy resin structural adhesive, which can quickly curing and improve work efficiency. It has excellent bonding properties to metals, ceramics, glass, and plastics. It can be cured at room temperature and can also be cured by heating.

If you still have questions after reading, please click the QR code to enter the shake number to find AB fast-drying small video, you can see the whole picture of this product more intuitively..

(2) Features

● A, B component, 1: 1 proportion, easy to operate and convenient

● High mechanical properties, strong internal strength, meet high strength bonding requirements

● Small volume shrinkage after curing, low linear expansion coefficient

● No corrosion, no damage to the substrate;

(3) Technical parameters

Before curing parameters:

project

Performance

Remark remark

Group A

B component

Exterior exterior

Light yellow / transparent viscous fluid

Light yellow / transparent viscous fluid

Adjustable

Viscosity (25 ° C) MPA.S

10000 ~ 16000

15000 ~ 20000

Power (25 ° C) g / cm3

1.16 ± 0.1

1.10 ± 0.1

Mix ratio (weight ratio)

A: B: 1

Location time (min / 25 ° C)

5 ~ 10

Adjustable

Complete curing time (h)

3 ~ 7/25 ° C or 1/80 ° C

After curing parameters:

project

Performance

Remark remark

Curing color

Pale yellow transparent

SHORE D)

80 ± 5

Adjustable

Bonding strength (MPa)


Dielectric constant (25 ° C, 1 kHz)


Volume resistance (Ω-cm)

3.5 × 1013

Surface resistance (Ω-cm)

3 × 1014

Medium loss (25 ° C, 1 kHz)

0.015

Dielectric strength (25 ° C) kV / mm


Temperature range (° C)

-40 ~ 100

 

(4) How to use

1. The surface of the substrate should have no water, clean and clean;

2. Mount the double-pinch into the rubber gun or load the push rod at the tail to open the lid of the front end of the double-pinch, load the static mixing tube into the card, and push the push rod or extruded the rubber gun, so that the collapse Full of static mix tubes, please don't use the first little glue;

3. Wipe the rubber material on a hand-conditioned surface, and immediately adhere the substrate to be bonded and press it;

4. When discovering the push rod or rubber gun, please replace the static mixing tube; (Static mix tube is consumable, please prepare enough)

5. Use in air circulation to avoid contact with collapse;

6. After use, remove the static mixing tube and cover the cover of the front end of the double needle.

Note: It is normal to exotherm when mixing.

  

(5) Storage and validity period

The product should be stored at a cool and ventilated and ventilated and ventilated in a temperature below 25 ° C, and the shelf life is 6 months from the production date. It can still be used after overdue testing.

 

(6) Packaging specifications:

1. Double Needle: 50ml / Support

2. Double Needle: 400ml / Support

FAQ
Take a look, avoid stepping on the thunder
Recommended Products
Corners can also encounter
 Company: Shenzhen Deemno Technology Co., Ltd.  
Address: Xinjincheng Industrial Park, New Village, Dalang Street, Longhua District, Shenzhen  
  • 13923434764